Features January 2015 Issue

Our Safety Harness Recommendation

Canine automobile safety harnesses are not all created equal; here’s the only one we’d use.

As Dorea Fowler and her two daughters were nearing the end of a road trip from Atlanta to Florida, Fowler allowed her 7-year-old Boxer, Ruby, to move up and sit unrestrained in the front passenger seat of her Toyota Highlander. They were traveling uneventfully down the highway at about 65 mph, as they had for hundreds of miles, when suddenly Fowler’s SUV was struck from behind. Upon first impact, the Boxer stood up; then Fowler’s vehicle spun out of control. As the car rotated, Ruby went airborne, flew across Fowler’s lap, and hit the driver’s side window with her head. The car then hit a guard rail head on. The vehicle’s air bag and seat belts protected Fowler (and her two children), but Ruby rocketed forward into the windshield between the driver’s door and air bag. When the vehicle came to rest, Ruby was lying on her side across the front seat. The Boxer was still alive, but rigid as a board, indicating to Fowler (an RN) that Ruby had a serious head injury.

boxer with partial paralysis from car accident

Photo by Dorea Fowler

Ruby survived a car accident while riding unrestrained, but not without lingering side effects, including partial paralysis on her left side.

Obviously, Fowler is not the only person to drive with her dog unrestrained in her car; more than 80 percent of American pet owners admit to playing the same sort of vehicular Russian roulette with loose dogs in their cars. So far, there are no laws that require pets to be protected with car safety restraints, though at least one state (Hawaii) has made it illegal to drive with a pet on one’s lap – more due to the danger of distracted driving than to protect the dogs.

Dogs can certainly distract their drivers in any number of ways in a car, but it’s even more common for them to be a completely innocent victim – indeed, the most vulnerable victim – in a car accident. Mandatory seat-belt laws mean that most drivers and human passengers today are belted into cars, but few dogs receive this protection. Because most of them are unrestrained, our canine companions can become deadly projectiles in an out-of-control car, injuring passengers or themselves. Frequently, they are thrown out of the car (often through a window), and in pain and panic, bolt from the scene of an accident, never to be seen again.

Injury Prevention Options

Most restraint systems, including crates, car seats, and harness/seat belt combinations, can prevent our dogs from distracting us while we’re driving. Financial considerations, convenience, the size of our dogs, as well as the size of the vehicles we already own, may dictate that a safety harness and seat belt are the best of those options for simply keeping the dog out of the driver’s way.

We’d be willing to bet, however, that all of us dog owners who are willing to use a car restraint system for our dogs expect whatever system we use to do more than simply prevent our dogs from being distractions; we also absolutely expect that they’ll keep our dogs safe in the event of an accident.

Which is why it was so upsetting to read a recent study by a nonprofit, independent pet-safety advocacy group, the Center for Pet Safety (CPS), which reported that very few of the products intended to protect our dogs in cars are capable of doing so. Most of the car safety restraints included in the CPS tests exhibited “catastrophic failures” – in other words, they either broke, or failed to secure the crash-test-dummy dogs in simulated crashes.

Accident Sparks a Passion for Safety

The CPS was founded by consultant and long-time pet safety advocate Lindsey Wolko after – what else? – an incident on the road with her English Cocker Spaniel in the car. Wolko is one of the few dog owners who regularly uses a car safety restraint on her dog. She had chosen her dog’s restraint harness carefully, after scrutinizing lots of product labels, to make sure the restraint she chose was intended to not only keep her dog from being a distraction while Wolko was driving, but also protect the dog in the case of an accident.

The harness did indeed prevent her dog from hopping around the car. But it wasn’t until Wolko had that near-miss at rush hour on a major metropolitan highway that she realized the harness didn’t perform the way she thought it would. Cut off unexpectedly by another motorist, Wolko slammed on the brakes. The jolt caused her dog to rocket off the back seat, crash against the front seat, and become entangled in the harness’s long tether. Wolko’s dog survived, but was seriously injured.

Shaken and distraught, Wolko began investigating canine car-safety restraints from the perspective of a safety expert, rather than just a consumer. She soon discovered that U.S. manufacturers are not required to crash-test pet travel products before bringing them to market. Further, she learned that there were absolutely no independent standards for any tests that companies conducted to crash-test their products; while some manufacturers claimed their products were crash-tested, this information was useless to consumers (and their dogs) in the absence of test standards.

Independent Car Safety Testing

A woman on a mission, Wolko set out to create a standard for testing pet-safety restraints. She founded CPS, dedicating the organization to companion-animal and consumer safety, and set a goal for CPS to conduct rigorous crash testing on pet-safety products using realistic crash-test-dummy dogs.

In partnership with Subaru of America, CPS engaged the services of MGA Research Corporation, an independent National Highway Traffic Safety Administration (NHTSA) contract testing laboratory, to conduct crash testing of canine car restraints. CPS developed specially weighted and designed crash-test-dummy dogs for use during testing: a 25-pound “terrier-mix,” a 45-pound “Border Collie,” and a 75-pound “Golden Retriever.”

crash test dummy dog

A crash-test-dummy dog (and a multitude of cameras) all set for a Center for Pet Safety (CPS) restraint test.

Crash-Test Candidates

Initially, Wolko focused her attention on products whose manufacturers claimed, in advertising or product labeling, that the product had undergone “testing,” “crash testing,” or offered “crash protection.” During her research, Wolko had found that most of the manufacturers who made a claim regarding crash testing referenced the Federal Motor Vehicle Safety Standard (FMVSS) 213, “Child Restraint Systems.” This is indisputably the most rigorous standard that can and should be met by any car-safety restraint. But Wolko also discovered that many of the manufacturers who conducted crash testing tested only the “medium” size of their product, rather than the complete size range in which the product was offered. She also found that, frequently, a manufacturer’s definition of “passing” crash testing was subjective. Most importantly, Wolko’s research revealed lots of product marketing claims that were largely unfounded.

crash test dummy dog

The CPS developed three crash-test-dummy dogs; the largest is this 75-pound “Golden Retriever.”

After exhaustive research of the market, Wolko found 11 brands of harnesses that met her criteria – products whose manufacturers made claims of crash testing and protection. These 11 would be the first products she tested.

Preliminary Testing

Each crash test costs about $2,000 to conduct, and the independent tests were going to be paid for by CPS and Subaru, not the manufacturers of the products. So, in order to potentially rule out any obviously inferior products prior to crash testing, CPS conducted preliminary strength testing of the harnesses.

crash test dummy dog

This photo is worth 1,000 words on why reliable and independent crash testing of dog safety restraints is needed. A truly protective safety harness does not allow a dog to “launch” on impact. (For worse shocks, see the videos on CPS’s site: centerforpetsafety.org/research/2013-harness-crash-test-videos/.)

Products purchased at retail outlets by CPS were placed on a solid dog-shaped form and pulled until the harness broke. If a particular harness withstood a five-second hold period at a specific load, then it was deemed acceptable to move on to the crash-testing phase. A failure – in any size harness – would knock that harness brand completely out of consideration for further testing.

Only seven of the 11 harness brands passed these static tests and advanced to the crash-testing phase.

Crash Testing

In general, CPS’s concept of the ideal harness would be one that, during impact, would keep a dog on the seat, control rotation of the dog (both fore and aft, as well as side to side) to help stabilize the dog’s spine, and keep adjacent passengers safe. CPS determined the following to be critical variables as to whether a harness was a “Top Performer” in these respects:

- Does the harness exhibit a catastrophic failure such that the test dog becomes a projectile or is released from the restraint? That is, does the harness break, freeing the dog to launch?

- Does the test dog stay on the seat for the entirety of the crash test? Even if the dog remains attached to the restraint, falling off the seat increases her risk of further injury.

- Does the harness have a tether that prevents adjustment to a length of six inches or less? Long tethers are dangerous, allowing the dog to launch and/or becoming wrapped around the dog’s body or limbs, leading to the risk of further injury. “Zip lines” are equally dangerous.

- Does the testing indicate uniform performance across all sizes?

The CPS used the data gathered in its tests to develop and publish its recommended standards for canine car-safety products: CPS-001-014.01, the Companion Animal Safety Harness Restraint System Standard.

At the end of the day, six of the seven harnesses included in the tests failed to meet the CPS-001-014.01 standards.

One manufacturer requested (and paid for) a re-test of its product, but only after making one change to their product’s application on the test dog dummy. The maker reversed the position of a carabiner on the harness, which improved the test result; however, it’s worth noting that the original position of the carabiner was set according to the product’s label directions. (Note: The CPS wouldn’t disclose the name of this product or manufacturer, because the manufacturer refused to sign a formal licensing agreement with CPS.)

Sole Survivor
The only product to pass the CPS tests and earn the CPS designation of “Top Performer” in the CPS 2013 Safety Harness Crashworthiness Study was the Sleepypod Clickit Utility Harness, which retails for about $90.

During testing, all three sizes of the Sleepypod Clickit Utility Harness offered by the company at the time (size XS has since been added) prevented the launch and controlled the rotation of the test-dog dummy; in addition, the dog remained on the seat after impact, and there were no equipment failures.

The Utility’s three-point connection is similar, conceptually, to the three-point seat belt required for humans by federal law. The harness is meant to be used in the rear seat (no front-seat usage!) where two side straps latch onto baby-seat anchors (which are standard equipment on all vehicles manufactured after 2003). The third connection point is via a seat belt, which is passed through the back of the harness.

Sleepypod uses a specific measurement – the total length of a figure eight around a dog’s neck and torso – to indicate which size of its product a dog should wear. The company recommends that small dogs (those who measure less than 31 inches using the measuring protocol, seen in the adjacent illustration) do not wear a harness, but are crated in a crash-tested and well-secured pet carrier instead. Very large dogs, too, are not considered good candidates for the Sleepypod Utility Harness; it’s not recommended for any dogs who measure more than 60 inches and/or weigh more than 75 pounds. (The heaviest test-dog dummy used in the CPS tests was 75 pounds, so the harness is untested at weights greater than that.)

Wherein We Try The Sleepypod Utility Harness
Atle, my Bouvier, is a few inches shy of the maximum measurement, and weighs in at just under 75 lbs. Getting the harness on him was pretty easy; it simply slips over the dog’s head, with two adjustable straps criss-crossing the dog’s back, and then buckles on each side.

The “vest” of the harness itself is nicely padded, and hugs the dog’s upper torso. In my opinion, it’s not too bulky or overbuilt, and surprisingly lightweight ; it can even do double duty as a walking harness.

It’s easiest to clip the two side straps to the vehicle’s anchors first, put the harness on the dog, load the dog into the car and ask him to sit, and then attach the straps to the dog’s harness. The dog’s behind should be snug against the seat when he is sitting up. The final step is to thread the car’s seat belt through the back straps of the harness and click the latch plate into the latch.

Securing Atle into my vehicle with the Utility Harness for the first few times took a little elbow grease. My first attempt at stuffing him into the back seat of my sporty station wagon left me sweaty and a bit frustrated, and he was more than a little unsure about the whole enterprise.

After a bit of struggle, and repeated out-loud readings of the instructions provided with the harness, we retired to the house for a break and for some further research online. That’s when I discovered that Sleepypod’s website features slightly better instructions for attaching the two side straps than the ones included with the harness. (It turns out that a hook on the side strap needs to pass through a D-ring on the harness, then clasp onto another smaller ring.)

For my next attempt, I loaded Atle into our van’s rear seat. First I lengthened the straps as far as they could go, and then tightened them once they were attached to the car anchors and the harness. The van seat is a little deeper than the wagon’s, and has more head room, which helped.

Sleepypod’s Clickit Utility Harness comes with straps that attach to either side of the harness and the car’s anchors. The car’s seat belt is passed through the back of the harness to provide a third connection.

I will say that trying to maneuver a large, hairy dog into a tight space can be difficult; ideally, he needs to be in a sitting position and perfectly positioned between the car’s anchors in order to clip the side straps to the harness. Once I got Atle clipped in, he was able to move fairly easily into a down position and seemed to relax. But then I found that sitting up became the bigger challenge for him.

I don’t know how my dog would fare in this rig on a long trip, but my first impression is that the product probably would work best for dogs who were not quite as large (or hairy) as Atle. With Atle pushing the limits of the size L, he might not be the best candidate for this particular model.

Next Best
Instead, we might consider a newer Sleepypod safety harness model, the Clickit Sport. This product was not yet on the market when the CPS conducted its 2013 tests, but has been tested by the CPS since, and was awarded a five-star crash-test rating. The Sport is available in three sizes and is priced at $70.

The Sport does not utilize the side straps that gave Atle and me palpitations; instead, the dog is secured only with the car’s seat belt, which is passed through the harness behind the dog’s back. Atle and I managed this easily even in the back of my station wagon.

Sleepypod’s cofounder Michael Leung commented on the differences between the company’s Sport and Utility harnesses: “The Sport was designed with ease of use in mind, and is light-weight. The frontal crash tests prove that it is as safe as the Clickit Utility.” Note that the Utility adds much more lateral control of the dog, and would add more protection for a dog in any situation beyond frontal collisions (such as side impacts).

An XL size of the Sport model (for dogs up to 90 pounds) is currently being tested by CPS and should be available by the time this article is in print.

The Rest of the Story
As I mentioned earlier, the Sleepypod Clickit Utility Harness was the only one of the seven harnesses that were included in the 2013 CPS crash tests that earned a “Top Performer” designation by CPS. One other product included in the tests exhibited catastrophic failure in both of its sizes; they broke during the crash tests. The remaining five candidates all failed in some category. Complete results can be found on the CPS website, along with some fairly disturbing video of the crash tests.

CPS invited all of the manufacturers of the products included in the tests to attend the crash tests, though only some accepted the invitation. How did the manufacturers who attended respond? “For some manufacturers, it was eye-opening and a very collaborative effort,” Wolko says. “Others didn’t appreciate our interpretation of crash protection. After the public response to the testing started to affect some of their product sales, many stopped speaking with CPS. There are several brands that applaud our efforts, and they are the ones working to consistently improve their products.”

Wolko cautions, however, that CPS recently discovered that some manufacturers are purposefully using the CPS video from testing to mislead consumers by proclaiming, “Yes, we’ve crash tested!” even if the product didn’t pass all of the CPS tests. CPS has also found manufacturers touting other connection options that were not tested but marketing the product as “safe.” It’s a classic case where buyer must be aware; don’t blindly believe the claims, but ask for substantiation. CPS hopes to run another harness test in 2015.

Hard Lesson
Remember Ruby, the Boxer mentioned at the beginning of this article? She survived her unscheduled flight around the inside of her owner’s car in the accident, but suffered a spinal-cord injury and mild brain injury. After months of intensive rehab and a $9,000 veterinary bill (paid for by the insurance company of the driver who caused the accident, who admitted to texting while driving), Fowler describes Ruby as still a “little wonky,” in that the dog still suffers from partial paralysis on her left side, and does not have full bowel control. Nonetheless, Fowler keeps her active and Ruby still loves to hike and run in the grass.

And how has car travel changed for the duo? After the accident, Fowler purchased a harness for Ruby and the dog now rides in the back of Fowler’s new SUV, secured in place. Upon learning that the harness she has been using did not pass the CPS crash tests, however, she said she’d be buying a newer one immediately. “It’s worth the money and emotional assurance to know that I’m doing all I can do to protect my dog!”

Lisa Rodier lives in Georgia with her husband and Atle the Bouvier, and volunteers with the American Bouvier Rescue League.

Comments (4)

What suggestions do you have for restraining puppies? Our pup is 3 months old and destined to get bigger; how much larger we don't know. I think it would be best to get him used to being appropriately restrained now, and, obviously safer for everyone. However, I don't relish the idea of buying two or three products in order to have the right fit now and as he grows.

Posted by: Vinny's Mom | August 4, 2016 11:58 AM    Report this comment

In response to KatiePumpkin: The Sleepypod Utility Harness was in the 2013 study and was the only model that passed. As the article says, the Sleepypod Clickit Sport model was not yet on the market when the CPS conducted its 2013 tests, but has been tested by the CPS since, and was awarded a five-star crash-test rating. -- WDJ Editor Nancy Kerns

Posted by: WDJ Editor Nancy Kerns | April 27, 2015 2:11 PM    Report this comment

Curious. Why are you recommending the Sleepypod Clickit Utility and Sport Harnesses when that one was not in the study? Can you elaborate please?

Posted by: KatiePumpkin | March 23, 2015 1:51 PM    Report this comment

Check the spelling of recommendation in the title

Posted by: Pawsitive Wellness Center | January 2, 2015 6:40 PM    Report this comment

New to Whole Dog Journal? Register for Free!

Already Registered?
Log In